Products

JIS 5K, 10K and 16K Pressure Classes

What 5K, 10K and 16K mean on JIS marine valves and JIS B2220 flanges, which classes we make, how the class decides the flange dimensions and the test pressures.

Request a quote

JIS 5K, 10K and 16K Pressure Classes

What 5K, 10K and 16K mean

5K, 10K and 16K are pressure classes of the Japanese Industrial Standards (JIS) – not sizes in inches. JIS B 2220 (steel pipe flanges) uses the classes 5K, 10K, 16K, 20K, 30K, 40K and 63K.

The size is given separately, as the nominal diameter in millimetres with the letter A: 40A is DN 40. Our product pages use DN.

A higher class is built for a higher pressure. How much pressure a flange or valve may actually carry depends on its material and on the temperature of the fluid; JIS B 2220 gives this in a pressure–temperature table.

Which classes we make

Our JIS marine valves are made to JIS F7400 with flanges to JIS B2220 in the class of the valve:

ClassJIS marine valvesJIS flanges
5KBronze: F7301, F7302, F7351, F7352, F7334 (Nakajima)
Cast iron: F7305, F7306, F7353, F7354, F7363
Cast steel: F3060
Flat-faced slip-on and blind, steel and stainless steel
10KBronze: F7334 (Nakajima)
Cast iron: F7307, F7375
Flat-faced slip-on, steel and stainless steel; blind, stainless steel
16KBronze: F7303, F7304, F7409, F7410Flat-faced slip-on and blind, steel and stainless steel

Our JIS flanges are also made in 20K and 40K.

The class decides the flange dimensions

Flanges of the same nominal size are drilled differently in each class and each standard. For DN 50 (slip-on, steel), from our product pages:

Standard and classD (mm)C (mm)Bolts
JIS 5K1301054
JIS 10K1551204
JIS 16K1551208
DIN PN 161651254
ASME B16.5 Class 1501521214

So the flanges of a valve must match the standard and class of the pipe flanges: a 5K flange does not fit a 10K flange, and 10K and 16K have the same diameters at DN 50 but a different number of bolts.

D and C are the letters of the drawings on our flange pages; all dimensions in millimetres.

The class decides the test pressures

JIS F 7400 tests every marine valve with water: the body at 1.5 times and the seat at 1.1 times the valve's maximum working pressure. For example, our cast iron globe valve JIS F7305 (5K) is tested at 1.03 MPa (body) and 0.76 MPa (seat) in DN 50–300, our cast iron globe valve JIS F7307 (10K) at 2.06 MPa and 1.51 MPa in DN 50–200.

The test values of every valve, by size, are on its product page.

Questions buyers ask

Is 5K a size?
No. 5K is the pressure class; the size is the nominal diameter DN (in Japanese notation with A, e.g. 50A = DN 50).
Does a 5K valve fit a 10K flange?
No. At the same size the flanges have different dimensions – see the table above.
Are JIS 10K and DIN PN 16 the same?
No. At DN 50 a JIS 10K flange is 155 mm with 4 bolts on 120 mm, a DIN PN 16 flange 165 mm with 4 bolts on 125 mm.
Which class do I need?
That depends on the pressure and temperature of your system and on the class your ship or plant specification names. Tell us the specification and we confirm the valve or flange.
Are you the manufacturer?
Yes. O.S.K. Çavuşyan is a family-run company that has made valves in Istanbul since 1948; we also make the JIS, DIN and ANSI flanges shown on this site.

Request a quote

Tell us the sizes and quantities you need — we reply with a quote.

JIS 5K, 10K and 16K Pressure Classes

    We use your details to answer your request. Details: Privacy Policy.

    Request a quote

    JIS 5K, 10K and 16K Pressure Classes

      We use your details to answer your request. Details: Privacy Policy.